Water King softeners use fiberglass and steel tanks with our Taskmaster valve, the Magnum valve or a Diaphragm valve nest.
RF softeners feature the Taskmaster III™ - 1½” stainless steel valve top mounted on 12x52 to 48x72 polyglass mineral tanks. Salt for regenerating the WK100 polystyrene softening resin is supplied by an Accumatic brine system.
BF softeners feature the Magnum IT valve (1½” or 2”) top mounted on 12x52 to 30x72 polyglass mineral tanks. Salt for regenerating the WK100 polystyrene softening resin is supplied by an Accumatic brine system.
MF softeners feature the Taskmaster II™ - 1½” valve side mounted with galvanized face piping on 20x54 to 36x72 epoxy coated steel mineral vessels. Salt for regenerating the WK100 polystyrene softening resin is supplied by an Accumatic brine system. The tank internal distributors are multipoint ABS distributors and schedule 80 PVC pipe.
HF softeners feature the Taskmaster™ - 2” OR 2½” valve side mounted on 20x54 to 72x72 epoxy coated steel mineral vessels. Using the superflow configuration, these systems can accommodate inlet and outlet piping up to 6”. Salt for regenerating the WK100 polystyrene softening resin is supplied by an Accumatic brine system. The tank internal distributors are multipoint ABS distributors and schedule 80 PVC pipe. Hub and lateral distributors are used on systems 48” in diameter and larger.
VN 150 to 3000 with 1 1/2, 2, 2 1/2 or 3 inch inlet and outlet piping with tanks from 20 to 72 inches in diameter. Six diaphragm valves opened and closed by a rotary pilot valve (stager) automatically accomplish the five cycle of softening. This nest of valves or valve nest (VN) is mounted on the face piping of 20 to 72 inch diameter epoxy coated steel mineral vessels. Internals are two and four point slotted distributors with single or four point upper distributors of schedule 80 PVC.
VN 900 to 3000 softeners have 4 or 6
inch inlet and outlet piping with tanks from 42 to 72 inches in diameter. Six
diaphragm valves opened and closed by a rotary pilot valve (stager)
automatically accomplish the five cycle of softening. This nest of valves or
valve nest (VN) is mounted on the face piping of 45 to 72 inch diameter epoxy
coated steel mineral vessels. Hub and lateral internals are used on tanks 48” in
diameter and larger.
VN 3000 to 9000 4F and 6F softeners
have 4 or 6 inch inlet and outlet piping with tanks from 78 to 120 inches in
diameter. Six diaphragm valves opened and closed by a rotary pilot valve
(stager) automatically accomplish the five cycle of softening. This nest of
valves or valve nest (VN) is mounted on the face piping of 78 to 120 inch
diameter epoxy coated steel mineral vessels. Header lateral internals are used
on tanks 78” in diameter and larger.
BF residential and light commercial systems feature the Performa plastic (¾” or 1”) valve top mounted on 10 to 14 inch diameter polyglass mineral tanks. The performa uses the 742 Logix controller which can operate in a variety of timing modes. Salt for regenerating the WK100 polystyrene softening resin is supplied by an Accumatic brine system.
Custom Softeners - Water King can meet the most stringent industrial specifications including oil field, food services, medical facilities, municipal water supply, and chemical plants. Call us to discuss your water system needs