Water King has a full selection of taste odor and sediment water filter products which install in-line for single faucet or whole-house use.

Our standard 10-inch cartridge is industrial quality equipment. The sump is molded of durable polypropylene plastic. Leak-proof sealing is accomplished by cap compression against a top seated 241 Buna-N O-ring in the sump. The Acme square thread closure allows for years of cartridge change outs without failure. Thick walls and multiple ribs make these housings strong and durable. The polypropylene housing has excellent chemical resistance.

RESISTANT TO:

• Acids
• Alcohols

• Ammonia
• Oils

• Plating Solutions
• Beverages
• Water

10 INCH SPECIFICATION

• Maximum operating pressure: 125 PSI
• Maximum operating temperature: 125°F
• Weight of filter with cartridge: 3.06 lbs.
• Pipe thread: 3/4" FNPT inlet/outlet
• Materials: All plastic, FDA approved
• Part No. A150067 for 3/4"

20 INCH BIG BLUE SPECIFICATION

• Maximum operating pressure: 90 PSI
• Maximum operating temperature: 100°F
• Weight of filter with cartridge: 6.7 lbs.
• Pipe thread: 1 1/2" and 1" FNPT inlet/outlet
• Materials: All plastic, FDA approved
• Part No. A150233 for 1"
• Part No. A150235 for 1 1/2"

Mounting Brackets

WATER FILTER REPLACEMENT CARTRIDGES
A variety of standard-sized replacement cartridges in a choice of filtering capacities for both taste/odor or rust and sediment problems is available. Our cartridges fit most water filters using standard 9 3/4" cartridges; Sta-Rite, Ametek, Cuno, Fulflo, Omni, Sears, Filterite, Town & Country, Parker, and Universal.

• ACTIVATED CARBON PAPER (Better). Standard cartridge for removing taste and odors. Removes unpleasant, stale, musty, metallic and chlorine tastes/odors. Also effectively removes rust and sediment to 5 microns.
  • Part No. 820079
• GRANULAR ACTIVATED CARBON (Best). Deluxe cartridge for maximum taste and odor removal, longer life. Removes unpleasant, stale, musty, metallic and chlorine tastes/odors. Also removes swampy tastes/odors. Effectively removes rust and sediment to 5 microns.
  • Part No. 820080
• POLYPROPYLENE STRING WOUND (Good). Sediment cartridge for filtration of suspended solids. For water that appears to be slightly cloudy. Removes suspended solids including sand, silt, rust, scale and other solids to 50 microns.
  • Part No. 820073 for 9¾"
  • Part No. AWP5BB20P for 20"
• PLEATED PAPER (Better). Standard cartridge for removing rust and sediment. Removes sand, silt, rust, scale and other solids to 20 microns.
  • Part No. 820078 for 20 microns
  • Part No. 820054 for 5 microns
• POLYPROPYLENE (Best). Deluxe sediment cartridge for maximum filtration, longer life. For water that appears to be slightly cloudy. Removes suspended solids that are unseen to the eye including sand, silt, rust, scale and other solids to 5 microns.
  • Part No. 820056 for 5 microns
  • Part No. 820057 for 25 microns