Softeners

Standard Softener System Configurations
Series	RF	MF	HF	VN	BF
Tank	FRP – Fiberglass	Epoxy External Coating and Epoxy Liner 100 psi non-code steel vessels			FRP – Fiberglass
Valve	Task Master III^TM Top mount 316SS 1-½ inch valve	Task Master III^TM Side mount 316SS 1-½ inch valve	Task Master^TMwith either 2” or 2 ½” tank adaptor. 3” and 4” systems use Super Flow piping.	Six DM Diaphragm Valves mounted on face piping operated by a Stager. Standard pipe size up to 6”.	Magnum IT™ 1 ½” and 2” Top mount plastic valve
Timer	Six (6) day timers are standard. Add –3 to part number for 7 - day timers. Add –4 for ARC timers.
Brine Valve	Brine systems use either blow mold or rotationally molded corrosion resistant HDPE tanks with Accumatic™ 3/8” to 1 ¼” brine valve.
Bottom Distributor	Single Point ABS slotted distributor 30” & 36” Ø tanks use PVC Hub and Lateral.	Steel Tank Systems Use: 18” to 24” Ø – 2 point ABS multipoint slotted distributor 30” & 36” Ø – 4 point ABS multipoint slotted distributor 42” Ø – 6 point ABS multipoint slotted distributor 48” to 72” Ø Sch 80 Hub and Lateral w/ 0.012 inch slots			Single Point ABS slotted distributor 30” & 36” Ø tanks have PVC Hub and Lateral
Top Distributor	N/A	18” to 36” Ø – 1 point 42 to 72” Ø – 4 point	18” to 36” Ø – 1 point 42 to 72” Ø – 4 point	18” to 36” Ø – 1 point 42 to 72” Ø – 4 point	N/A
Brine Injector	Internal	Models 150 to 750 are internal. Models 900 to 3000 are external.		External	Internal
Backwash Flow Controller	Models 150 to 300 are internal. Models 450 and above are external.	Models 150 to 750 are internal. Models 900 and 1200 are external.	External	External	Internal

Standard Softener System Configurations

Tank