1 ½ inch Stainless steel Commercial Industrial Water Softener and Filter Valve
Application:
Top mounted in Water King RF Series,
Side mounted in Water King MF Series , Side mounted in MF Super Flow systems.
· The Task Master IIIä is a 316 Stainless Steel 1½ inch, five cycle, water softener control valve.
· There is only one moving part – the piston.
· The valve body is 316 SS and the piston is stainless steel with EPDM seals and inserts.
· The valve has two different tank adaptors allowing top mount on a fiberglass tank or side mount on the face piping on a steel tank.
· The housing for the brine ejector is cast into the valve body making it an integral part of the valve.
· The piston is motor driven and is not dependent on water pressure. It shifts smoothly without water hammer. The drive assembly positions the plunger for each of the five cycles.
· The valve design assures synchronization of the drive assembly with the electronic timer and optical sensors making certain the plunger is correctly positioned for each of the five cycles of softening.
· ERCt 6-day or 7-day electronic timer with ability to independently program each cycle time.
· ERCd demand regeneration timer with variable reserve.
· The electrical enclosure carries a NEMA 4 rating.
· Since brining and process control often must be coordinated with the regeneration cycles of a softener, the valve is designed to provide an on/off signal and dry contacts for external electrical functions.
· Temperature rating is 180°F. Operating pressure is 125 psi.
· 71 gpm backwash rate (at 25 psi head loss)
Certifications: UL, CSA, TÜV and CE. ANSI/NSF 61 (pending)