|
MF FG Softener Series Specifications |
Standard product
descriptions are used in quotations and submittals. They include part
numbers so that they will be specific and tell how the system will be
built.
SX:
Simplex
SM: Simplex Metered
TS: Twin Sequential
TA: Twin Alternating
TP: Twin Parallel
Back To Top |
Part No |
Quant |
Description |
System: |
950150 |
|
Model MF FG-150-1 ½”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100186 |
1 |
18x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
1 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-1-2 |
1 |
Lower Dist Assy, 18", 6" SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
1 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW08 |
1 |
8 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479922 |
1 |
5 ft³ / 100 lb per vessel |
Rated continuous / peak flow: |
QMF150S1 |
- |
49 / 65 gpm per vessel |
Capacity: |
CAPMF150S |
- |
153,000 grains per vessel |
Brine Tank: |
805076 |
1 |
24X40 Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
- |
* |
- |
- |
Bypass: |
BYPASS |
- |
Unit will bypass hard water during regeneration |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF150S |
- |
69 ¼” x 31 ¼” x 50” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF150S |
- |
859 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950152-11 |
|
Model MF FG-150-1 ½”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100186 |
2 |
18x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
2 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-1-2 |
2 |
Lower Dist Assy, 18", 6" SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
2 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW08 |
2 |
8 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479922 |
2 |
5 ft³ / 100 lb per vessel |
Rated continuous / peak flow: |
QMF150S1 |
- |
49 / 65 gpm per vessel |
Capacity: |
CAPMF150T |
- |
153,000 grains per vessel : 306,000 grains both vessels |
Brine Tank: |
805076 |
1 |
24X40 Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Shut off kit: |
720088 |
2 |
1 1/2" Shut off kit with one DM150 cast iron diaphragm valve
(For MF) |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF150T |
- |
69 ¼” x 31 ¼” x 76” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF150T |
- |
1661 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951150 |
|
Model MF FG-150-2”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100186 |
1 |
18x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-5 |
1 |
Upper Dist Assy 21-24", 6" SNAFG 3 PT |
Lower distributor: |
500000-1-2 |
1 |
Lower Dist Assy, 18", 6" SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
1 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW08 |
1 |
8 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479922 |
1 |
5 ft³ / 100 lb per vessel |
Rated continuous / peak flow: |
QMF150S2 |
- |
50 / 75 gpm per vessel |
Capacity: |
CAPMF150S |
- |
153,000 grains per vessel |
Brine Tank: |
805076 |
1 |
24X40 Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
Bypass: |
BYPASS-S |
- |
Super flow unit piped to bypass thru TM III during regen |
Super flow kit: |
720002 |
1 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF150S |
- |
69 ¼” x 31 ¼” x 50” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF150S |
- |
859 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951152-11 |
|
Model MF FG-150-2”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100186 |
2 |
18x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-5 |
2 |
Upper Dist Assy 21-24", 6" SNAFG 3 PT |
Lower distributor: |
500000-1-2 |
2 |
Lower Dist Assy, 18", 6" SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
2 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW08 |
2 |
8 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479922 |
2 |
5 ft³ / 100 lb per vessel |
Rated continuous / peak flow: |
QMF150S2 |
- |
50 / 75 gpm per vessel |
Capacity: |
CAPMF150T |
- |
153,000 grains per vessel : 306,000 grains both vessels |
Brine Tank: |
805076 |
1 |
24X40 Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Super flow kit: |
720002 |
2 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF150T |
- |
69 ¼” x 31 ¼” x 76” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF150T |
- |
1661 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950240 |
|
Model MF FG-240-1 ½”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100187 |
1 |
24x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
1 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-1-1 |
1 |
Lower Dist Assy, 21-24", 6" SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
1 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW15 |
1 |
15 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479926 |
1 |
8 ft³ / 150 lb per vessel |
Rated continuous / peak flow: |
QMF240S1 |
- |
51 / 67 gpm per vessel |
Capacity: |
CAPMF240S |
- |
245,000 grains per vessel |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
- |
* |
- |
- |
Bypass: |
BYPASS |
- |
Unit will bypass hard water during regeneration |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF240S |
- |
70 1/2” x 35 ¼” x 54” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF240S |
- |
1111 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950242-11 |
|
Model MF FG-240-1 ½”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100187 |
2 |
24x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
2 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-1-1 |
2 |
Lower Dist Assy, 21-24", 6" SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
2 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW15 |
2 |
15 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479926 |
2 |
8 ft³ / 150 lb per vessel |
Rated continuous / peak flow: |
QMF240S1 |
- |
51 / 67 gpm per vessel |
Capacity: |
CAPMF240T |
- |
245,000 grains per vessel : 490,000 grains both vessels |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Shut off kit: |
720088 |
2 |
1 1/2" Shut off kit with one DM150 cast iron diaphragm valve
(For MF) |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF240T |
- |
70 1/2” x 35 ¼” x 84” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF240T |
- |
2165 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951240 |
|
Model MF FG-240-2”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100187 |
1 |
24x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-5 |
1 |
Upper Dist Assy 21-24", 6" SNAFG 3 PT |
Lower distributor: |
500000-1-1 |
1 |
Lower Dist Assy, 21-24", 6" SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
1 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW15 |
1 |
15 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479926 |
1 |
8 ft³ / 150 lb per vessel |
Rated continuous / peak flow: |
QMF240S2 |
- |
80 / 120 gpm per vessel |
Capacity: |
CAPMF240S |
- |
245,000 grains per vessel |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
Bypass: |
BYPASS-S |
- |
Super flow unit piped to bypass thru TM III during regen |
Super flow kit: |
720002 |
1 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF240S |
- |
70 1/2” x 35 ¼” x 54” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF240S |
- |
1111 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951242-11 |
|
Model MF FG-240-2”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100187 |
2 |
24x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-5 |
2 |
Upper Dist Assy 21-24", 6" SNAFG 3 PT |
Lower distributor: |
500000-1-1 |
2 |
Lower Dist Assy, 21-24", 6" SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
2 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW15 |
2 |
15 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479926 |
2 |
8 ft³ / 150 lb per vessel |
Rated continuous / peak flow: |
QMF240S2 |
- |
80 / 120 gpm per vessel |
Capacity: |
CAPMF240T |
- |
245,000 grains per vessel : 490,000 grains both vessels |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Super flow kit: |
720002 |
2 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF240T |
- |
70 1/2” x 35 ¼” x 84” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF240T |
- |
2165 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950300 |
|
Model MF FG-300-1 ½”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100190 |
1 |
30x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
1 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-5-7 |
1 |
Lower Dist Assy, 30", SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
1 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW25 |
1 |
25 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479927 |
1 |
10 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF300S1 |
- |
55 / 71 gpm per vessel |
Capacity: |
CAPMF300S |
- |
293,000 grains per vessel |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
- |
* |
- |
- |
Bypass: |
BYPASS |
- |
Unit will bypass hard water during regeneration |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF300S |
- |
81 ¼” x 41 ¼” x 60” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF300S |
- |
1514 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950302-11 |
|
Model MF FG-300-1 ½”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100190 |
2 |
30x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
2 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-5-7 |
2 |
Lower Dist Assy, 30", SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
2 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW25 |
2 |
25 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479927 |
2 |
10 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF300S1 |
- |
55 / 71 gpm per vessel |
Capacity: |
CAPMF300T |
- |
293,000 grains per vessel : 586,000 grains both vessels |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Shut off kit: |
720088 |
2 |
1 1/2" Shut off kit with one DM150 cast iron diaphragm valve
(For MF) |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF300T |
- |
81 ¼” x 41 ¼” x 102” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF300T |
- |
2971 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951300 |
|
Model MF FG-300-2”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100190 |
1 |
30x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
1 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-7 |
1 |
Lower Dist Assy, 30", SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
1 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW25 |
1 |
25 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479927 |
1 |
10 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF300S2 |
- |
100 / 150 gpm per vessel |
Capacity: |
CAPMF300S |
- |
293,000 grains per vessel |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
Bypass: |
BYPASS-S |
- |
Super flow unit piped to bypass thru TM III during regen |
Super flow kit: |
720002 |
1 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF300S |
- |
81 ¼” x 41 ¼” x 60” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF300S |
- |
1514 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951302-11 |
|
Model MF FG-300-2”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100190 |
2 |
30x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
2 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-7 |
2 |
Lower Dist Assy, 30", SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
2 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW25 |
2 |
25 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479927 |
2 |
10 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF300S2 |
- |
100 / 150 gpm per vessel |
Capacity: |
CAPMF300T |
- |
293,000 grains per vessel : 586,000 grains both vessels |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Super flow kit: |
720002 |
2 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF300T |
- |
81 ¼” x 41 ¼” x 102” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF300T |
- |
2971 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
953300 |
|
Model MF FG-300-3”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100190 |
1 |
30x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
1 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-7 |
1 |
Lower Dist Assy, 30", SNAFG, Hub and Lateral |
Face Piping: |
809620-MF FG |
1 |
Face Pipe MF FG 3" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW25 |
1 |
25 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479927 |
1 |
10 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF300S3 |
- |
100 / 150 gpm per vessel |
Capacity: |
CAPMF300S |
- |
293,000 grains per vessel |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Line Assembly: |
200126-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
Bypass: |
BYPASS-S |
- |
Super flow unit piped to bypass thru TM III during regen |
Super flow kit: |
720003-1 |
1 |
3" Super flow kit with two DM300G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF300S |
- |
81 ¼” x 41 ¼” x 60” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF300S |
- |
1514 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
953302-11 |
|
Model MF FG-300-3”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100190 |
2 |
30x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
2 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-7 |
2 |
Lower Dist Assy, 30", SNAFG, Hub and Lateral |
Face Piping: |
809620-MF FG |
2 |
Face Pipe MF FG 3" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW25 |
2 |
25 gpm internal BW control
with 3/4" drain |
Media (Resin / gravel): |
479927 |
2 |
10 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF300S3 |
- |
100 / 150 gpm per vessel |
Capacity: |
CAPMF300T |
- |
293,000 grains per vessel : 586,000 grains both vessels |
Brine Tank: |
805077 |
1 |
24X50 Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine Valve: |
706022 |
1 |
⅜” Brine Valve |
Brine Director Assembly: |
200442-2 |
1 |
½” Poly Propylene Tubing for ⅜” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Super flow kit: |
720003-1 |
2 |
3" Super flow kit with two DM300G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF300T |
- |
81 ¼” x 41 ¼” x 102” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF300T |
- |
2971 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950450 |
|
Model MF FG-450-1 1/2"-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100189 |
1 |
36x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
1 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-5-5 |
1 |
Lower Dist Assy, 36", SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
1 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW35 |
1 |
35 gpm internl BW control
with 1 1/2" drain |
Media (Resin / gravel): |
479928 |
1 |
15 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF450S1 |
- |
53 / 70 gpm per vessel |
Capacity: |
CAPMF450S |
- |
432,000 grains per vessel |
Brine Tank: |
805177 |
1 |
30X50 Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine Valve: |
706044 |
1 |
1/2" Brine Valve - PVC Sch 80 |
Brine Line Assembly: |
200126-3 |
1 |
½” Poly Propylene Tubing for ½” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
- |
* |
- |
- |
Bypass: |
BYPASS |
- |
Unit will bypass hard water during regeneration |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF450S |
- |
81 ¼” x 41 ¼” x 74” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF450S |
- |
1832 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
950452-11 |
|
Model MF FG-450-1 ½”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100189 |
2 |
36x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100343-5 |
2 |
Upper Dist Assy 18-48, 6" SNAFG 1 PT |
Lower distributor: |
500000-5-5 |
2 |
Lower Dist Assy, 36", SNAFG, Hub and Lateral |
Face Piping: |
809605-MF FG |
2 |
Face Pipe MF FG 1 1/2" 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW35 |
2 |
35 gpm internl BW control
with 1 1/2" drain |
Media (Resin / gravel): |
479928 |
2 |
15 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF450S1 |
- |
53 / 70 gpm per vessel |
Capacity: |
CAPMF450T |
- |
432,000 grains per vessel : 864,000 grains both vessels |
Brine Tank: |
805177 |
1 |
30X50 Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine Valve: |
706044 |
1 |
1/2" Brine Valve - PVC Sch 80 |
Brine Director Assembly: |
200442-3 |
1 |
½” Poly Propylene Tubing for ½” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Shut off kit: |
720088 |
2 |
1 1/2" Shut off kit with one DM150 cast iron diaphragm valve
(For MF) |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF450T |
- |
81 ¼” x 41 ¼” x 110” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF450T |
- |
3554 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951450 |
|
Model MF FG-450-2”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100189 |
1 |
36x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
1 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-5 |
1 |
Lower Dist Assy, 36", SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
1 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW35 |
1 |
35 gpm internl BW control
with 1 1/2" drain |
Media (Resin / gravel): |
479928 |
1 |
15 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF450S2 |
- |
110 / 146 gpm per vessel |
Capacity: |
CAPMF450S |
- |
432,000 grains per vessel |
Brine Tank: |
805177 |
1 |
30X50 Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine Valve: |
706044 |
1 |
1/2" Brine Valve - PVC Sch 80 |
Brine Line Assembly: |
200126-3 |
1 |
½” Poly Propylene Tubing for ½” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
Bypass: |
BYPASS-S |
- |
Super flow unit piped to bypass thru TM III during regen |
Super flow kit: |
720002 |
1 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF450S |
- |
81 ¼” x 41 ¼” x 74” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF450S |
- |
1832 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
951452-11 |
|
Model MF FG-450-2”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100189 |
2 |
36x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
2 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-5 |
2 |
Lower Dist Assy, 36", SNAFG, Hub and Lateral |
Face Piping: |
809606-MF FG |
2 |
Face Pipe MF FG 2" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW35 |
2 |
35 gpm internl BW control
with 1 1/2" drain |
Media (Resin / gravel): |
479928 |
2 |
15 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF450S2 |
- |
110 / 146 gpm per vessel |
Capacity: |
CAPMF450T |
- |
432,000 grains per vessel : 864,000 grains both vessels |
Brine Tank: |
805177 |
1 |
30X50 Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine Valve: |
706044 |
1 |
1/2" Brine Valve - PVC Sch 80 |
Brine Director Assembly: |
200442-3 |
1 |
½” Poly Propylene Tubing for ½” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Super flow kit: |
720002 |
2 |
2" Super flow kit with two DM200G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF450T |
- |
81 ¼” x 41 ¼” x 110” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF450T |
- |
3554 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
- |
TA |
- |
|
Twin Alternating (- TA). In twin alternating (TA) mode units
operate so that once a predetermined amount of water has passed
through the flow meter the ERCd initiates regeneration of the
exhausted unit placing its twin in service. One unit is on line
(in service) and one is either in standby or regeneration. The
ERCd demand initiated regeneration controller controls the
regeneration cycles for both of the twin alternating units in a
master slave configuration. Twin alternating systems shall have
two mineral tanks, two Taskmaster IIIä control valves, one brine
tank with brine director, one ERCd controller, one PW, PWS or TM
series flow meter and two shut off kits. Regeneration initiation
and meter display shall be provided by the ERCd. |
Optional PG & test tap kit: |
PGTTK |
2 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
953450 |
|
Model MF FG-450-3”-Simplex (SX) Water Softener |
|
|
|
|
Mineral Tank: |
100189 |
1 |
36x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
1 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-5 |
1 |
Lower Dist Assy, 36", SNAFG, Hub and Lateral |
Face Piping: |
809620-MF FG |
1 |
Face Pipe MF FG 3" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW35 |
1 |
35 gpm internl BW control
with 1 1/2" drain |
Media (Resin / gravel): |
479928 |
1 |
15 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF450S3 |
- |
150 / 225 gpm per vessel |
Capacity: |
CAPMF450S |
- |
432,000 grains per vessel |
Brine Tank: |
805177 |
1 |
30X50 Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine Valve: |
706044 |
1 |
1/2" Brine Valve - PVC Sch 80 |
Brine Line Assembly: |
200126-3 |
1 |
½” Poly Propylene Tubing for ½” Brine Valve |
Valves: |
707150 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCt 99-day
electronic timer |
Bypass: |
BYPASS-S |
- |
Super flow unit piped to bypass thru TM III during regen |
Super flow kit: |
720003-1 |
1 |
3" Super flow kit with two DM300G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
1 |
Taskmaster III Side Mount SS Tank Adaptor |
- |
* |
- |
- |
Dimensions (HtxDepthxWidth): |
DIMMF450S |
- |
81 ¼” x 41 ¼” x 74” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF450S |
- |
1832 lbs |
Literature: |
LITMFFG |
- |
CAT232, CAT315, CAT281, CAT610 |
Conditions: |
OPCOND |
- |
Max Operating Temp: 120F Max Operating Pressure: 125 psi |
- |
* |
- |
- |
Operating Mode: |
SIMPLEX |
- |
|
Simplex (-SX). Simplex systems shall have regeneration initiated
by time of day or “clock time”. SX systems shall have one brine
tank, one Taskmaster IIIä control valve, one ERCt controller.
Ordering an optional shut off kit will prevent hard water
bypass. |
Optional PG & test tap kit: |
PGTTK |
1 |
|
Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4)
per vessel |
|
Back To Top |
Part No |
Quant |
Description |
System: |
953452-11 |
|
Model MF FG-450-3”-TA Twin Alternating Water Softener |
|
|
|
|
Mineral Tank: |
100189 |
2 |
36x72 FG Composite Vessel 6" SNF Top Bottom 150 psi test
pressure |
Upper distributor: |
100344-6 |
2 |
Upper Dist Assy 30-63", 6" SNAFG 3 PT |
Lower distributor: |
500000-5-5 |
2 |
Lower Dist Assy, 36", SNAFG, Hub and Lateral |
Face Piping: |
809620-MF FG |
2 |
Face Pipe MF FG 3" Super 20-30"Tanks w/ Vacc breaker and Rack |
Backwash Rate: |
BW35 |
2 |
35 gpm internl BW control
with 1 1/2" drain |
Media (Resin / gravel): |
479928 |
2 |
15 ft³ / 250 lb per vessel |
Rated continuous / peak flow: |
QMF450S3 |
- |
150 / 225 gpm per vessel |
Capacity: |
CAPMF450T |
- |
432,000 grains per vessel : 864,000 grains both vessels |
Brine Tank: |
805177 |
1 |
30X50 Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine Valve: |
706044 |
1 |
1/2" Brine Valve - PVC Sch 80 |
Brine Director Assembly: |
200442-3 |
1 |
½” Poly Propylene Tubing for ½” Brine Valve 3/4" Brine Director
|
Valves: |
707150-5 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with ERCd demand
regeneration control |
Valves: |
707150-6 |
1 |
Task Master III™ 1 1/2" or 2" SS Control Valve with indicator
light (slave unit) |
Super flow kit: |
720003-1 |
2 |
3" Super flow kit with two DM300G cast iron diaphragm valves |
Tank Adaptor: |
720216 |
2 |
Taskmaster III Side Mount SS Tank Adaptor |
Flow Meter: |
500841 |
1 |
PW150 1 ½” Paddle Wheel Flow Meter 5-140 gpm (w/ plug) |
Dimensions (HtxDepthxWidth): |
DIMMF450T |
- |
81 ¼” x 41 ¼” x 110” |
- |
ADD |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTMF450T |
- |
3554 lbs |
Literature: |
LITMFFGMTR |
- |
CAT232, CAT315, CAT370, CAT281, CAT420, CAT610 |
Conditions: |
OPCOND |
| | |