Standard product descriptions are used in quotations and submittals. They include part numbers so that they will be specific and tell how the system will be built.

To assemble a full specification, cut and paste the following:

1. Standard product description (SPD). You must select or create a description of the product you intend to specify.

2. Standard Information (add to end of SPD). Choose Simplex, Simplex Metered, Twin, Twin Alternating, Twin Sequential, Triplex Sequential or Quad Sequential. 

3. RF Series Specifications.

4.  RF Skid Standard Features (if system is skid mounted).

Changes to standard product descriptions:

If a standard system must be modified, then strike through the standard language and insert the change. This will help us to focus on the change. For example, if the pressure gauges needed to be 4 ½” we would note the change as follows:

Standard language:

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Submittal or quote showing change:

Optional PG & test tap kit:      Two 2 ½” 4 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel. (Included in quotation and submittal)

 

Simplex Standard Information (add to end of SPD)

Max Operating Temp:              120°F

Max Operating Pressure:          125 psi

Literature:                      CAT211, CAT315, CAT610

O&M Manual:                      900401

Simplex (-SX). Simplex systems shall have regeneration initiated by time of day or “clock time”. SX systems shall have one brine tank, one Taskmaster III^TM control valve, one ERCt controller. Ordering an optional shut off kit will prevent hard water bypass.

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Optional shut off kit:           Solenoid operated 1½” cast iron diaphragm valve DM150  (720088) to prevent hard water bypass during regeneration. One SOK on each vessel. See Catalog Section CAT370. For a simplex system, a shut off kit may “shut off the water” to a facility during regeneration.

Simplex Metered Standard Information (add to end of SPD)

Max Operating Temp:              120°F

Max Operating Pressure:          125 psi

Literature:                      CAT211, CAT315, CAT420, CAT610

O&M Manual:                      900401

Simplex metered (-SM). Simplex metered systems shall have regeneration initiated by gallons treated (demand). SM systems shall have one brine tank, one Taskmaster III^TM control valve, one ERCd controller, one PW, PWS or TM series flow meter. Regeneration initiation and meter display shall be provided by the ERCd. This unit will bypass hard water during regeneration.

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Optional shut off kit:           Solenoid operated 1½” cast iron diaphragm valve DM150  (720088) to prevent hard water bypass during regeneration. One SOK on each vessel. See Catalog Section CAT370. For a simplex system, a shut off kit may “shut off the water” to a facility during regeneration.

 

Twin Standard Information (add to end of SPD)

Max Operating Temp:              120°F

Max Operating Pressure:          125 psi

Literature:                      CAT211, CAT315, CAT370, CAT610

O&M Manual:                      900401

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Twin (-T). Twin systems shall consist of two mineral tanks with attached Taskmaster III^TM control valves and one brine tank with a brine director. Regeneration initiation shall be by an ERCt time initiated electronic regeneration controller on each unit. Vessels will regenerate on time of day.

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Optional shut off kit:           Solenoid operated 1½” cast iron diaphragm valve DM150  (720088) to prevent hard water bypass during regeneration. One SOK on each vessel. See Catalog Section CAT370. Shut off kits are not included in twin systems, thus with the standard set up hard water will bypass a softener in regeneration. An SOK prevents this. 

Twin Alternating Standard Information (add to end of SPD)

Shut off kit:                    Included in TA/TS systems. Solenoid operated 1½” cast iron diaphragm valve DM150 (720088) to prevent hard water bypass during regeneration. One SOK on each vessel.

Max Operating Temp:              120°F

Max Operating Pressure:          125 psi

Literature:                      CAT211, CAT315, CAT370, CAT420, CAT610

O&M Manual:                      900401

Twin Alternating (- TA).  In twin alternating (TA) mode units operate so that once a predetermined amount of water has passed through the flow meter the ERCd initiates regeneration of the exhausted unit placing its twin in service. One unit is on line (in service) and one is either in standby or regeneration. The ERCd demand initiated regeneration controller controls the regeneration cycles for both of the twin alternating units in a master slave configuration. Twin alternating systems shall have two mineral tanks, two Taskmaster III^TM control valves, one brine tank with brine director, one ERCd controller, one PW, PWS or TM series flow meter and two shut off kits. Regeneration initiation and meter display shall be provided by the ERCd.

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Twin Sequential Standard Information (add to end of SPD)

Shut off kit:                    Included in TA/TS systems. Solenoid operated 1½” cast iron diaphragm valve DM150 (720088) to prevent hard water bypass during regeneration. One SOK on each vessel.

Max Operating Temp:              120°F

Max Operating Pressure:          125 psi

Literature:                      CAT211, CAT315, CAT370, CAT420, CAT610

O&M Manual:                      900401

Twin sequential (- TS).  In twin sequential (TS) mode both units are in service unless a unit is in regeneration. The flow through both units is directed into a single meter. Once a predetermined amount of water has passed through the flow meter the ERCd initiates sequential regeneration of both units. When regeneration of the primary tank is complete, the ERCd sends an intiation to the ERCt on the secondary tank causing it to regenerate. Twin sequential systems shall have two mineral tanks, two Taskmaster III^TM control valves, one brine tank with brine director, one ERCd controller, one ERCt controller, one PW, PWS or TM series flow meter and two shut off kits. An advantage of the sequential configuration is that the secondary unit can operate independent of the primary unit. Regeneration initiation and meter display shall be provided by the ERCd. The ERCt controls the cycle times on the secondary vessel.

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Triplex and Quad Sequential Standard Information (add to end of SPD)

Shut off kit:                    Included in TA/TS systems. Solenoid operated 1½” cast iron diaphragm valve DM150 (720088) to prevent hard water bypass during regeneration. One SOK on each vessel.

Max Operating Temp:              120°F

Max Operating Pressure:          125 psi

Literature:                      CAT211, CAT315, CAT370, CAT420, CAT610

O&M Manual:                      900401

Triplex and Quad sequential. (- TXS / - QS).  In triplex and quad sequential  mode all units are in service unless a unit is in regeneration. The flow through all units is directed into a single meter. Once a predetermined amount of water has passed through the flow meter the ERCd initiates regeneration of the primary unit. When regeneration of the primary unit is complete, the ERCd sends an intiation to the ERCt on the secondary tank causing it to regenerate. When the secondary unit is regenerated the ERCt on this unit send an initation signal to the third unit. When the third unit is regenerated, a signal is sent to the fourth unit. Triplex sequential systems shall have three mineral tanks, three Taskmaster III^TM control valves, one brine tank with three brine valves, one ERCd controller, two ERCt controllers, one PW, PWS or TM series flow meter and four shut off kits. Quad sequential systems shall have four mineral tanks, four Taskmaster III^TM control valves, one brine tank with four brine valves, one ERCd controller, three ERCt controllers, one PW, PWS or TM series flow meter and four shut off kits. An advantage of the sequential configuration is that the secondary units can operate independent of the primary unit. Regeneration initiation and meter display shall be provided by the ERCd. The ERCt controls the cycle times on the secondary and tertiary vessels.

Optional PG & test tap kit:      Two 2 ½” Ø face oil filled PGs and brass sample valve (720075-4) per vessel

Quad sequential. (- QS). 

RF Series Specification (Copied directly, with no changes, from CAT211 with redundant sections eliminated. Use with SPD.)

Mineral Tank. The mineral tank shall be “polyglass” consisting of an inner shell of virgin polyethylene and an external shell of continuous fiberglass roving. Tanks shall be rated at 150 psi operating pressure, 120ºF operating temperature with 4”-8 UN threaded top opening. 

Internals. The distributor shall be a 2½” Ø single point molded distributor head with 2½” of slotted length and a 1½ inch female socket welded connection. The slots shall be 0.012" - 0.016" wide to retain mineral and the total slot area shall be equal to or larger than the unit pipe size. The distributor pipe shall be 1½" schedule 40 white PVC. 

Media. The resin shall be sodium form polystyrene 8% divinyl benzene cross linked resin with clear spherical beads. Resin beads shall be 16-50 US Standard Mesh with a particle size range of 0.3 to 1.2 mm. The resin shall be clean and packaged in sealed plastic bags weighing 55 lbs or less.

Underbedding.  The bottom of this mineral tank shall be filled above the distributor with #20 graded washed flint gravel sieved between 1/8” and 1/16”.

Brine System. The brine system shall be of the Accumatic^TM high grid plate design.  The brine tank shall be blow molded or rotationally molded HDPE, including a cover. The system shall include a SCH 80 PVC float operated brine valve to control refill shut off and refill flow rate.  Brine volume is to be repeatedly accurate within 10% and not dependent on salt bed void space for brine volume. Brine draw is to be volumetrically controlled, not timed.

Control Valve Specifications. The main control valve(s) shall be the Task Master III^TM with electronic controller to actuate the cycles of backwash, brine, slow rinse, fast rinse, and service for a water softener (or backwash, rinse and service for a filter). The control valve(s) shall be Task Master III™ 5-Cycle, multi-port control valve(s) with machined passivated CF8M Type 316 Stainless Steel body, Type 316 Stainless Steel piston assembly, and EPDM (NSF61 and WRAS Approved) inserts and seals with electronic controller and drive motor assembly in a NEMA 4/IP65 Style Enclosure.  The valve shall operate with a single motor driven piston positioned by optical sensors. Valve inlet and outlet shall be 1 ½” FNPT. Backwash drain shall be ¾” or 1 ½” depending on flow. The brine inlet shall be ½”. The one piece brine eductor shall be installed in the valve. The valve shall be equipped with threaded ¼” FNPT ports for the installation of sample taps and pressure gauges. (Taps and gauges are optional.) Hard water by-pass shall be available during all regeneration cycles at 70 gpm or at the peak flow rate of the unit, at a pressure drop less than 25 psi, whichever is less. No hard water bypass option is obtained by adding a shut off kit to the valve. The valve shall be of a single piston design and shall not use multiple plungers or diaphragm valves. Maximum rated power shall be 125 watts with available current options of 115 VAC, 230 VAC, 100 VAC, 200 VAC, in 50 or 60 Hertz. Ambient operating temperature range shall be 34°F (1°C) to 150°F (65°C). Fluid temperature range shall be 34°F (1°C) to 180°F (82°C). Operating pressure range shall be 20-125 psi (1.38 - 8.6 bar). The valve shall have UL, CSA, TÜV and CE certifications.  ANSI/NSF 61 certification is pending.

System Operating Conditions. Maximum temperature shall be 120°F. Maximum Pressure shall be 125 psi. The temperature rating can be raised to 150°F by specifying Viton seals for the shut off kits (-V), vinyl ester resin for the mineral tanks, and 10% DVB cross-linked resin as the media.

Other items. A standard soft water soap test kit shall be provided. A complete set of instructions, including installation, loading, start-up, adjustments, servicing, and a parts list shall be provided with the equipment. 

Qualifications. A company that has continuously manufactured water softeners for at least twenty (20) years shall construct this equipment.

Shut off kit. Hard water bypass during regeneration shall be prevented by a shut off kit to include a cast iron body diaphragm valve (DM Series) and a three-way solenoid valve with wiring and conduit to connect to Task Master III^TM.
 

RF-50-1½-Simplex Softener (910050)

Valves:                          One - Task Master III™ valve (707150-39)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 12”x52” polyglass (100044)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          1½ ft³ / 20 lb (479902) per vessel

Brine Tank:                      18x40 Accumatic™ Brine Sys (805061) 11” Grid Ht

Brine Valve / Line Assy:         3/8” (706022 BV) 1/2” (200126-2 BLA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 41 / 58 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      15 / 23 gpm per vessel

Rated Continuous/Peak Flow:      15 / 23 gpm per vessel

Backwash Rate:                   4 gpm (internal)

Factory Preset Capacity:         49,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     59” x 18” x 36”

                                 (add one foot to height for loading media)

Shipping Weight:                 300 lbs

Drawing:                         WKrf50

 

RF-50-1½-Simplex Metered Softener (910050-5)

Valves:                          One - Task Master III™ valve (707150-39-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 12”x52” polyglass (100044)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          1½ ft³ / 20 lb (479902) per vessel

Brine Tank:                      18x40 Accumatic™ Brine Sys (805061) 11” Grid Ht

Brine Valve / Line Assy:         3/8” (706022 BV) 1/2” (200126-2 BLA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 41 / 58 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      15 / 23 gpm per vessel

Rated Continuous/Peak Flow:      15 / 23 gpm per vessel

Backwash Rate:                   4 gpm (internal)

Factory Preset Capacity:         49,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     59” x 18” x 36”

                                 (add one foot to height for loading media)

Shipping Weight:                 300 lbs

Drawing:                         WKrf50
 

RF-50-1½-Twin Softener (910052)

Valves:                          Two - Task Master III™ valve (707150-39)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 12”x52” polyglass (100044)

Distributor:                     Single point slotted distributor

System Resin Capacity:           3 ft³

Media (Resin / gravel):          1½ ft³ / 20 lb (479902) per vessel

Brine Tank:                      18x40 Accumatic™ Brine Sys (805061) 11” Grid Ht

Brine Valve / Director Assy:     3/8” (706022 BV) 1/2” (200442-2 BDA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 41 / 58 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      15 / 23 gpm per vessel

Rated Continuous/Peak Flow:      15 / 23 gpm per vessel

                                 30 / 46 gpm both vessels sequential mode

Backwash Rate:                   4 gpm (internal)

Factory Preset Capacity:         49,000 grains per vessel

                                 98,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     59” x 18” x 54”

                                 (add one foot to height for loading media)

Shipping Weight:                 440 lbs

Drawing:                         WKrf50T

 

RF-50-1½-Twin Alternating (910052-11)

Valves:                          Two - Task Master III™ valve (707150-39-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 12”x52” polyglass (100044)

Distributor:                     Single point slotted distributor

System Resin Capacity:           3 ft³

Media (Resin / gravel):          1½ ft³ / 20 lb (479902) per vessel

Brine Tank:                      18x40 Accumatic™ Brine Sys (805061) 11” Grid Ht

Brine Valve / Director Assy:     3/8” (706022 BV) 1/2” (200442-2 BDA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 41 / 58 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      15 / 23 gpm per vessel

Rated Continuous/Peak Flow:      15 / 23 gpm per vessel

Backwash Rate:                   4 gpm (internal)

Factory Preset Capacity:         49,000 grains per vessel

                                 98,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     59” x 18” x 54”

                                 (add one foot to height for loading media)

Shipping Weight:                 440 lbs

Drawing:                         WKrf50T
 

RF-70-1½-Simplex Softener (910050)

Valves:                          One - Task Master III™ valve (707150-39)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 13”x54” polyglass (100046)

Distributor:                     Single point

Media (Resin / gravel):          2¼ ft³ / 30 lb (479903) per vessel

Brine Tank:                      18x40 Accumatic™ Brine System (805061) 11” Grid Ht

Brine Valve / Line Assy:         3/8” (706022 BV) 1/2” (200126-2 BLA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 39 / 55 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      23 / 34 gpm per vessel

Rated Continuous/Peak Flow:      23 / 34 gpm per vessel

Backwash Rate:                   4 gpm (internal)

Preset Capacity:                 69,000 grains per vessel

System includes polyethylene loading funnel.

(HtxDepthxWidth):                61” x 18” x 43”

                                 (add one foot to height for loading media)

Shipping Weight:                 350 lbs

Drawing:                         WKrf70

 

RF-70-1½-Simplex Metered Softener (910070-5)

Valves:                          One - Task Master III™ valve (707150-39-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 13”x54” polyglass (100046)

Distributor:                     Single point

Media (Resin / gravel):          2¼ ft³ / 30 lb (479903) per vessel

Brine Tank:                      18x40 Accumatic™ Brine System (805061) 11” Grid Ht

Brine Valve / Line Assy:         3/8” (706022 BV) 1/2” (200126-2 BLA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 39 / 55 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      23 / 34 gpm per vessel

Rated Continuous/Peak Flow:      23 / 34 gpm per vessel

Backwash Rate:                   4 gpm (internal)

Preset Capacity:                 69,000 grains per vessel

System includes polyethylene loading funnel.

(HtxDepthxWidth):                61” x 18” x 43”

                                 (add one foot to height for loading media)

Shipping Weight:                 350 lbs

Drawing:                         WKrf70

 

RF-70-1½-Twin Softener (910072)

Valves:                          Two - Task Master III™ valve (707150-39)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 13”x54” polyglass (100046)

Distributor:                     Single point

System Resin Capacity:           4½ ft³

Media (Resin / gravel):          2¼ ft³ / 30 lb (479903) per vessel

Brine Tank:                      18x40 Accumatic™ Brine System (805061) 11” Grid Ht

Brine Valve / Director Assy:     3/8” (706022 BV) 1/2” (200442-2 BDA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 39 / 55 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      23 / 34 gpm per vessel

Rated Continuous/Peak Flow:      23 / 34 gpm per vessel

                                 46 / 68 gpm both vessels sequential mode

Backwash Rate:                   4 gpm (internal)

Preset Capacity:                 69,000 grains per vessel

                                 138,000 grains for system

System includes polyethylene loading funnel.

(HtxDepthxWidth):                61” x 18” x 62”

                                 (add one foot to height for loading media)

Shipping Weight:                 565 lbs

Drawing:                         WKrf70T

 

RF-70-1½-Twin Alternating Softener (910072-11)

Valves:                          Two - Task Master III™ valve (707150-39-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 13”x54” polyglass (100046)

Distributor:                     Single point

System Resin Capacity:           4½ ft³

Media (Resin / gravel):          2¼ ft³ / 30 lb (479903) per vessel

Brine Tank:                      18x40 Accumatic™ Brine System (805061) 11” Grid Ht

Brine Valve / Director Assy:     3/8” (706022 BV) 1/2” (200442-2 BDA)

Preset brine draw:               29 lbs as NaCl

Salt Storage:                    320 lbs

Flow at 10/15/25 psi ΔP 70°F:    30 / 39 / 55 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      23 / 34 gpm per vessel

Rated Continuous/Peak Flow:      23 / 34 gpm per vessel

Backwash Rate:                   4 gpm (internal)

Preset Capacity:                 69,000 grains per vessel

                                 138,000 grains for system

System includes polyethylene loading funnel.

(HtxDepthxWidth):                61” x 18” x 62”

                                 (add one foot to height for loading media)

Shipping Weight:                 565 lbs

Drawing:                         WKrf70T

 

RF-100-1½-Simplex Softener (910100)

Valves:                          One-Task Master III™ valve (707150-40)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 14”x65” polyglass (100017)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          3¼ ft³ / 40 lb (479904) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    29 / 38 / 54 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      33 / 49 gpm per vessel

Rated Continuous/Peak Flow:      33 / 49 gpm per vessel

Backwash Rate:                   5 gpm (internal)

Preset Capacity:                 100,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 44”

                                 (add one foot to height for loading media)

Shipping Weight:                 420 lbs

Drawing:                         WKrf100

 

RF-100-1½-Simplex Metered Softener (910100-5)

Valves:                          One - Task Master III™ valve (707150-40-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 14”x65” polyglass (100017)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          3¼ ft³ / 40 lb (479904) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    29 / 38 / 54 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      33 / 49 gpm per vessel

Rated Continuous/Peak Flow:      33 / 49 gpm per vessel

Backwash Rate:                   5 gpm (internal)

Preset Capacity:                 100,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 44”

                                 (add one foot to height for loading media)

Shipping Weight:                 420 lbs

Drawing:                         WKrf100

 

RF-100-1½-Twin Softener (910102)

Valves:                          Two - Task Master III™ valve (707150-40)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 14”x65” polyglass (100017)

Distributor:                     Single point slotted distributor

System Resin Capacity:           6½ ft³

Media (Resin / gravel):          3¼ ft³ / 40 lb (479904) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    29 / 38 / 54 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      33 / 49 gpm per vessel

Rated Continuous/Peak Flow:      33 / 49 gpm per vessel

                                 66 / 98 gpm both vessels sequential mode

Backwash Rate:                   5 gpm (internal)

Preset Capacity:                 100,000 grains per vessel

                                 200,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 64”

                                 (add one foot to height for loading media)

Shipping Weight:                 705 lbs

Drawing:                         WKrf100T

 

RF-100-1½-Twin Alternating Softener (910102-11)

Valves:                          Two - Task Master III™ valve (707150-40-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 14”x65” polyglass (100017)

Distributor:                     Single point slotted distributor

System Resin Capacity:           6½ ft³

Media (Resin / gravel):          3¼ ft³ / 40 lb (479904) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    29 / 38 / 54 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      33 / 49 gpm per vessel

Rated Continuous/Peak Flow:      33 / 49 gpm per vessel

Backwash Rate:                   5 gpm (internal)

Preset Capacity:                 100,000 grains per vessel

                                 200,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 64”

                                 (add one foot to height for loading media)

Shipping Weight:                 705 lbs

Drawing:                         WKrf100T

 

 

 

RF-120-1½-Simplex Softener (910120)

Valves:                          One - Task Master III™ valve (707150-41)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 16”x65” polyglass (100087)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          4 ft³ / 55 lb (479905) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    34 / 44 / 60 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      40 / 60 gpm per vessel

Rated Continuous/Peak Flow:      40 / 60 gpm

Backwash Rate:                   6 gpm (internal)

Preset Capacity:                 120,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 46”

                                 (add one foot to height for loading media)

Shipping Weight:                 495 lbs

Drawing:                         WKrf120

 

RF-120-1½-Simplex Metered Softener (910120-5)

Valves:                          One - Task Master III™ valve (707150-41-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 16”x65” polyglass (100087)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          4 ft³ / 55 lb (479905) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    34 / 44 / 60 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      40 / 60 gpm per vessel

Rated Continuous/Peak Flow:      40 / 60 gpm

Backwash Rate:                   6 gpm (internal)

Preset Capacity:                 120,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 46”

                                 (add one foot to height for loading media)

Shipping Weight:                 495 lbs

Drawing:                         WKrf120

 

 

RF-120-1½-Twin Softener (910122)

Valves:                          Two - Task Master III™ valve (707150-41)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 16”x65” polyglass (100087)

Distributor:                     Single point slotted distributor

System Resin Capacity:           8 ft³

Media (Resin / gravel):          4 ft³ / 55 lb (479905) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Director:          ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    34 / 44 / 60 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      40 / 60 gpm per vessel

Rated Continuous/Peak Flow:      40 / 60 gpm

                                 80 / 120 gpm both vessels sequential mode

Backwash Rate:                   6 gpm (internal)

Preset Capacity:                 120,000 grains per vessel

                                 240,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 68”

                                 (add one foot to height for loding media)

Shipping Weight:                 845 lbs

Drawing:                         WKrf120T

 

RF-120-1½-Twin Alternating Softener (910122-11)

Valves:                          Two - Task Master III™ valve (707150-41-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 16”x65” polyglass (100087)

Distributor:                     Single point slotted distributor

System Resin Capacity:           8 ft³

Media (Resin / gravel):          4 ft³ / 55 lb (479905) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805075) 11” Grid Ht

Brine Valve / Director:          ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Preset brine draw:               51 lbs as NaCl

Salt Storage:                    570 lbs

Flow at 10/15/25 psi ΔP 70°F:    34 / 44 / 60 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      40 / 60 gpm per vessel

Rated Continuous/Peak Flow:      40 / 60 gpm

Backwash Rate:                   6 gpm (internal)

Preset Capacity:                 120,000 grains per vessel

                                 240,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     72” x 24” x 68”

                                 (add one foot to height for loding media)

Shipping Weight:                 845 lbs

Drawing:                         WKrf120T

 

RF-150-1½-Simplex Softener (910150)

Valves:                          One - Task Master III™ valve (707150-42)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 21”x62” polyglass (100089)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          5 ft³ / 140 lb (479906) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805076) 16” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               66 lbs as NaCl

Salt Storage:                    500 lbs

Flow at 10/15/25 psi ΔP 70°F:    42 / 53 / 71 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      50 / 75 gpm per vessel

Rated Continuous/Peak Flow:      50 / 71 gpm per vessel

Backwash Rate:                   10 gpm (internal)

Preset Capacity:                 150,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     73” x 24” x 51”

                                 (add one foot to height for loading media)

Shipping Weight:              665 lbs

Drawing:                      WKrf150

 

RF-150-1½-Simplex Metered Softener (910150-5)

Valves:                          One - Task Master III™ valve (707150-42-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 21”x62” polyglass (100089)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          5 ft³ / 140 lb (479906) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805076) 16” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               66 lbs as NaCl

Salt Storage:                    500 lbs

Flow at 10/15/25 psi ΔP 70°F:    42 / 53 / 71 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      50 / 75 gpm per vessel

Rated Continuous/Peak Flow:      50 / 71 gpm per vessel

Backwash Rate:                   10 gpm (internal)

Preset Capacity:                 150,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     73” x 24” x 51”

                                 (add one foot to height for loading media)

Shipping Weight:                 675 lbs

Drawing:                      WKrf150

 

 

RF-150-1½-Twin Softener (910152)

Valves:                          Two - Task Master III™ valve (707150-42)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 21”x62” polyglass (100089)

Distributor:                     Single point slotted distributor

System Resin Capacity:           10 ft³

Media (Resin / gravel):          5 ft³ / 140 lb (479906) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805076) 16” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               66 lbs as NaCl

Salt Storage:                    500 lbs

Flow at 10/15/25 psi ΔP 70°F:    42 / 53 / 71 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      50 / 75 gpm per vessel

Rated Continuous/Peak Flow:      50 / 71 gpm per vessel

                                 100 / 142 gpm both vessels sequential mode

Backwash Rate:                   10 gpm (internal)

Preset Capacity:                 150,000 grains per vessel

                                 300,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     73” x 24” x 78”

                                 (add one foot to height for loading media)

Shipping Weight:                 1185 lbs

Drawing:                      WKrf150T

 

RF-150-1½-Twin Alternating Softener (910152-11)

Valves:                          Two - Task Master III™ valve (707150-42-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 21”x62” polyglass (100089)

Distributor:                     Single point slotted distributor

System Resin Capacity:           10 ft³

Media (Resin / gravel):          5 ft³ / 140 lb (479906) per vessel

Brine Tank:                      24x40 Accumatic™ Brine Sys (805076) 16” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               66 lbs as NaCl

Salt Storage:                    500 lbs

Flow at 10/15/25 psi ΔP 70°F:    42 / 53 / 71 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      50 / 75 gpm per vessel

Rated Continuous/Peak Flow:      50 / 71 gpm per vessel

Backwash Rate:                   10 gpm (internal)

Preset Capacity:                 150,000 grains per vessel

                                 300,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     73” x 24” x 78”

                                 (add one foot to height for loading media)

Shipping Weight:                 1185 lbs

Drawing:                      WKrf150T

 

 

RF-240-1½-Simplex Softener (910240)

Valves:                          One - Task Master III™ valve (707150-43)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 24”x72” polyglass (100187)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          8 ft³ / 200 lb (479907) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    45 / 56 / 74 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      80 / 120 gpm per vessel

Rated Continuous/Peak Flow:      56 / 74 gpm per vessel

Backwash Rate:                   15 gpm (internal)

Preset Capacity:                 240,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     80” x 24” x 54”

                                 (add one foot to height for loading media)

Shipping Weight:                 925 lbs

Drawing:                         WKrf240

 

RF-240-1½-Simplex Metered Softener (910240-5)

Valves:                          One - Task Master III™ valve (707150-43-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 24”x72” polyglass (100187)

Distributor:                     Single point slotted distributor

Media (Resin / gravel):          8 ft³ / 200 lb (479907) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    45 / 56 / 74 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      80 / 120 gpm per vessel

Rated Continuous/Peak Flow:      56 / 74 gpm per vessel

Backwash Rate:                   15 gpm (internal)

Preset Capacity:                 240,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     80” x 24” x 54”

                                 (add one foot to height for loading media)

Shipping Weight:                 925 lbs

Drawing:                         WKrf240

 

 

RF-240-1½-Twin Softener (910242)

Valves:                          Two - Task Master III™ valve (707150-43)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 24”x72” polyglass (100187)

Distributor:                     Single point slotted distributor

System Resin Capacity:           16 ft³

Media (Resin / gravel):          8 ft³ / 200 lb (479907) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    45 / 56 / 74 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      80 / 120 gpm per vessel

Rated Continuous/Peak Flow:      56 / 74 gpm per vessel

                                 112 / 148 gpm both vessels sequential mode

Backwash Rate:                   15 gpm (internal)

Preset Capacity:                 240,000 grains per vessel

                                 480,000 for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     80” x 24” x 84”

                                 (add one foot to height for loading media)

Shipping Weight:                 1380 lbs

Drawing:                         WKrf240T

 

RF-240-1½-Twin Alternating Softener (910242-11)

Valves:                          Two-Task Master III™ valve (707150-43-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 24”x72” polyglass (100187)

Distributor:                     Single point slotted distributor

System Resin Capacity:           16 ft³

Media (Resin / gravel):          8 ft³ / 200 lb (479907) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    45 / 56 / 74 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      80 / 120 gpm per vessel

Rated Continuous/Peak Flow:      56 / 74 gpm per vessel

Backwash Rate:                   15 gpm (internal)

Preset Capacity:                 240,000 grains per vessel

                                 480,000 for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     80” x 24” x 84”

                                 (add one foot to height for loading media)

Shipping Weight:                 1380 lbs

Drawing:                         WKrf240T

 

 

RF-300-1½-Simplex Softener (910300)

Valves:                          One - Task Master III™ valve (707150-44)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 30”x72” polyglass (100190)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          10 ft³ / 250 lb (479908) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 79 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      100 / 150 gpm per vessel

Rated Continuous/Peak Flow:      61 / 79 gpm per vessel

Backwash Rate:                   25 gpm (internal)

Preset Capacity:                 293,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     86” x 30” x 60”

                                 (add one foot to height for loading media)

Shipping Weight:                 1095 lbs

Drawing:                         WKrf300

 

RF-300-1½-Simplex Metered Softener (910300-5)

Valves:                          One - Task Master III™ valve (707150-44-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 30”x72” polyglass (100190)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          10 ft³ / 250 lb (479908) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Line Assy:         ⅜” (706022 BV) w/   ½” (200126-2 BLA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 79 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      100 / 150 gpm per vessel

Rated Continuous/Peak Flow:      61 / 79 gpm per vessel

Backwash Rate:                   25 gpm (internal)

Preset Capacity:                 293,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     86” x 30” x 60”

                                 (add one foot to height for loading media)

Shipping Weight:                 1095 lbs

Drawing:                         WKrf300

 

 

RF-300-1½-Twin Softener (910302)

Valves:                          Two - Task Master III™ valve (707150-44)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 30”x72” polyglass (100190)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           20 ft³

Media (Resin / gravel):          10 ft³ / 250 lb (479908) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 79 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      100 / 150 gpm per vessel

Rated Continuous/Peak Flow:      61 / 79 gpm per vessel

                                 122 / 158 gpm both vessels sequential mode

Backwash Rate:                   25 gpm (internal)

Preset Capacity:                 293,000 grains per vessel

                                 586,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     86” x 30” x 96”

                                 (add one foot to height for loading media)

Shipping Weight:                 2115 lbs

Drawing:                         WKrf300T

 

RF-300-1½-Twin Alternating Softener (910302-11)

Valves:                          Two - Task Master III™ valve (707150-44-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 30”x72” polyglass (100190)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           20 ft³

Media (Resin / gravel):          10 ft³ / 250 lb (479908) per vessel

Brine Tank:                      24x50 Accumatic™ Brine Sys (805077) 21” Grid Ht

Brine Valve / Director Assy:     ⅜” (706022 BV) w/   ½” (200442-2 BDA)

Preset brine draw:               91 lbs as NaCl

Salt Storage:                    640 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 79 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      100 / 150 gpm per vessel

Rated Continuous/Peak Flow:      61 / 79 gpm per vessel

Backwash Rate:                   25 gpm (internal)

Preset Capacity:                 293,000 grains per vessel

                                 586,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     86” x 30” x 96”

                                 (add one foot to height for loading media)

Shipping Weight:                 2115 lbs

Drawing:                         WKrf300T

 

 

RF-450-1½-Simplex Softener (910450)

Valves:                          One - Task Master III™ valve (707150-45)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          15 ft³ / 300 lb (479909) per vessel

Brine Tank:                      30X50 Accumatic™ Brine Sys (805077) 24” Grid Ht

Brine Valve / Line Assy:         ½” (706044 BV) w/ ½” (200126-3 BLA)

Preset brine draw:               145 lbs as NaCl

Salt Storage:                    900 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      150 / 225 gpm per vessel

Rated Continuous/Peak Flow:      61 / 81 gpm

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 432,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 36” x 72”

                                 (add one foot to height for loading media)

Shipping Weight:                 1365 lbs

Drawing:                         WKrf450

 

RF-450-1½-Simplex Metered Softener (910450-5)

Valves:                          One - Task Master III™ valve (707150-45-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          15 ft³ / 300 lb (479909) per vessel

Brine Tank:                      30X50 Accumatic™ Brine Sys (805077) 24” Grid Ht

Brine Valve / Line Assy:         ½” (706044 BV) w/ ½” (200126-3 BLA)

Preset brine draw:               145 lbs as NaCl

Salt Storage:                    900 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      150 / 225 gpm per vessel

Rated Continuous/Peak Flow:      61 / 81 gpm

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 432,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 36” x 72”

                                 (add one foot to height for loading media)

Shipping Weight:                 1365 lbs

Drawing:                         WKrf450

 

 

RF-450-1½-Twin Softener (910452)

Valves:                          Two - Task Master III™ valve (707150-45)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           30 ft³

Media (Resin / gravel):          15 ft³ / 300 lb (479909) per vessel

Brine Tank:                      30X50 Accumatic™ Brine Sys (805077) 24” Grid Ht

Brine Valve / Director Assy:     ½” (706044 BV) ½” (200442-3 BDA)

Preset brine draw:               145 lbs as NaCl

Salt Storage:                    900 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      150 / 225 gpm per vessel

Rated Continuous/Peak Flow:      61 / 81 gpm

                                 122 / 162 gpm both vessels in sequential mode

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 432,000 grains per vessel

                                 864,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 36” x 114”

                                 (add one foot to height for loading media)

Shipping Weight:                 2625 lbs

Drawing:                         WKrf450T

 

RF-450-1½-Twin Alternating Softener (910452-11)

Valves:                          Two - Task Master III™ valve (707150-45-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           30 ft³

Media (Resin / gravel):          15 ft³ / 300 lb (479909) per vessel

Brine Tank:                      30X50 Accumatic™ Brine Sys (805077) 24” Grid Ht

Brine Valve / Director Assy:     ½” (706044 BV) ½” (200442-3 BDA)

Preset brine draw:               145 lbs as NaCl

Salt Storage:                    900 lbs

Flow at 10/15/25 psi ΔP 70°F:    49 / 61 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      150 / 225 gpm per vessel

Rated Continuous/Peak Flow:      61 / 81 gpm

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 432,000 grains per vessel

                                 864,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 36” x 114”

                                 (add one foot to height for loading media)

Shipping Weight:                 2625 lbs

Drawing:                         WKrf450T

 

 

RF-600-1½-Simplex Softener (910600)

Valves:                          One - Task Master III™ valve (707150-46)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          20 ft³ / 350 lb (479910) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Line Assy:         ½” (706044 BV) w/ ½” (200126-3 BLA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    51 / 62 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      200 / 300 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 594,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 42” x 87”

                                 (add one foot to height for loading media)

Shipping Weight:                 1645 lbs

Drawing:                         WKrf600

 

RF-600-1½-Simplex Metered Softener (910600-5)

Valves:                          One - Task Master III™ valve (707150-46-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          20 ft³ / 350 lb (479910) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Line Assy:         ½” (706044 BV) w/ ½” (200126-3 BLA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    51 / 62 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      200 / 300 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 594,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 42” x 87”

                                 (add one foot to height for loading media)

Shipping Weight:                 1645 lbs

Drawing:                         WKrf600

 

 

RF-600-1½-Twin Softener (910602)

Valves:                          Two - Task Master III™ valve (707150-46)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           40 ft³

Media (Resin / gravel):          20 ft³ / 350 lb (479910) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Director Assy:     ½” (706044 BV) ½” (200442-3 BDA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    51 / 62 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      200 / 300 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

                                 124 / 162 gpm both vessels sequential mode

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 594,000 grains per vessel

                                 1,188,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 42” x 135”

                                 (add one foot to height for loading media)

Shipping Weight:                 2825 lbs

Drawing:                         WKrf600T

 

RF-600-1½-Twin Alternating Softener (910602-11)

Valves:                          Two-Task Master III™ valve (707150-46-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 36”x72” polyglass (100189)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           40 ft³

Media (Resin / gravel):          20 ft³ / 350 lb (479910) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Director Assy:     ½” (706044 BV) ½” (200442-3 BDA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    51 / 62 / 81 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      200 / 300 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

Backwash Rate:                   35 gpm (internal)

Preset Capacity:                 594,000 grains per vessel

                                 1,188,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     90” x 42” x 135”

                                 (add one foot to height for loading media)

Shipping Weight:                 2825 lbs

Drawing:                         WKrf600T

 

RF-750-1½-Simplex Softener (910750)

Valves:                          One - Task Master III™ valve (707150-47)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCt demand (707201) 99-day electronic timer

Mineral Tank:                    One – 42”x72” polyglass (100191)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          25 ft³ / 350 lb (479911) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Line Assy:         ½” (706044 BV) w/ ½” (200126-3 BLA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    52 / 63 / 82 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      250 / 375 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

Backwash Rate:                   60 gpm (external)

Preset Capacity:                 731,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     101” x 48” x 93”

                                 (add one foot to height for loading media)

Shipping Weight:                 2500 lbs

Drawing:                         WKrf750

 

 

RF-750-1½-Simplex Metered Softener (910750-5)

Valves:                          One - Task Master III™ valve (707150-47-5)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    One – 42”x72” polyglass (100191)

Distributor:                     Hub and Lateral (703008)

Media (Resin / gravel):          25 ft³ / 350 lb (479911) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Line Assy:         ½” (706044 BV) w/ ½” (200126-3 BLA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    52 / 63 / 82 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      250 / 375 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

Backwash Rate:                   60 gpm (external)

Preset Capacity:                 731,000 grains per vessel

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     101” x 48” x 93”

                                 (add one foot to height for loading media)

Shipping Weight:                 2500 lbs

Drawing:                         WKrf750

 

 

RF-750-1½-Twin Softener (910752)

Valves:                          Two - Task Master III™ valve (707150-47)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         Two - ERCt (707201) 99-day electronic timers

Mineral Tank:                    Two – 42”x72” polyglass (100191)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           50 ft³

Media (Resin / gravel):          25 ft³ / 350 lb (479911) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Director Assy:     ½” (706044 BV) ½” (200442-3 BDA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    52 / 63 / 82 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      250 / 375 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

                                 124 / 162 gpm both vessels sequential mode

Backwash Rate:                   60 gpm (external)

Preset Capacity:                 731,000 grains per vessel

                                 1,462,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     101” x 48” x 147”

                                 (add one foot to height for loading media)

Shipping Weight:                 5000 lbs

Drawing:                         WKrf750T

 

RF-750-1½-Twin Alternating Softener (910752-11)

Valves:                          Two-Task Master III™ valve (707150-47-5 & -6)

Valve Size / Mat’l:              1 ½” or 2” FNPT / 316 Stainless Steel

Control:                         ERCd demand (707201-4) regeneration control

Meter:                           One – PW150 1½” Paddle wheel flow meter (500841)

Mineral Tank:                    Two – 42”x72” polyglass (100191)

Distributor:                     Hub and Lateral (703008)

System Resin Capacity:           50 ft³

Media (Resin / gravel):          25 ft³ / 350 lb (479911) per vessel

Brine Tank:                      39X60 Accumatic™ Brine Sys (805177) 24” Grid Ht

Brine Valve / Director Assy:     ½” (706044 BV) ½” (200442-3 BDA)

Preset brine draw:               244 lbs as NaCl

Salt Storage:                    2000 lbs

Flow at 10/15/25 psi ΔP 70°F:    52 / 63 / 82 gpm per vessel

Flow at 10/15 gpm/ft³ resin:      250 / 375 gpm per vessel

Rated Continuous/Peak Flow:      62 / 81 gpm per vessel

Backwash Rate:                   60 gpm (external)

Preset Capacity:                 731,000 grains per vessel

                                 1,462,000 grains for system

System includes polyethylene loading funnel.

Dimensions (HtxDepthxWidth):     101” x 48” x 147”

                                 (add one foot to height for loading media)

Shipping Weight:                 5000 lbs

Drawing:                      WKrf750T